Best Sellers
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
- Available in Aircraft Grade Aluminum (USA Sourced) or Black Zinc Electroplated High-Strength Steel
- Seasonably Adjustable Sun Angle From 15-45°
- Capable of Racking Very Large Modules
- 8" of Extra Ground Clearance
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt With Seasonal Adjustability
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
IR-40FSAB BallastRack™ Fixed Adjustable Angle Solar Module Racking System
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
- Constructed From Black Zinc Electroplated High-Strength Steel
- 15-40° Fixed Adjustable Solar Angle
- Capable of Racking Any Size Module
- 8" of Extra Ground Clearance
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt With Adjustable Angle
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
- Aeronautical Wind Tunnel Tested at 165 MPH with 3:1 Safety Factor
- No Roof Penetration
- No Tile Removal
- 4x Faster Install Times
- For Use With All Rail Systems
- Flex Point Prevents Bolt Tension From Cracking Tiles
IR-30 BallastRack™ Solar Module Racking System
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
- Proudly Made in the USA with USA Sourced Aircraft Grade Aluminum
- Fixed 30° Sun Angle
- Capable of Racking Any Size Solar Module
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
- High-Strength Engineering
IntegraRack® - Revolutionary Solar Racking
IntegraRack Solar Systems manufacturers a full line of class leading revolutionary super sealing solar roof brackets that are compatible with all rail based systems. All of our products are built to be stronger and faster than anything else on the market, and all of our products are backed by a full 25 year limited product warranty.
IntegraRack also manufactures the industries first no penetration tile roof mount, innovative no penetration wide foot TPO solar module mounting brackets and the fastest growing ballasted ground ground mount system in the world.
IntegraRack Solar Racking Systems are designed to make solar panel installation faster, easier, and more cost effective than ever before. All of IntegraRack Solar Racking products are manufactured out of our facilities in Las Vegas, Nevada and Utah. Our complete line of solar brackets and ground mount frames are corrosion resistant and rigorously lab tested and engineered for use in all 50 states by Phoenix National Laboratories.
Featured Products
IR-15 BallastRack™ Solar Module Racking System
- Proudly Made in the USA with USA Sourced Aircraft Grade Aluminum
- Fixed 15° Angle with 0° Hurricane Setting
- Capable Of Racking Any Size Module
- 2 Minute Assembly Per Frame
- Built To Withstand Hurricane Force Winds
- Lowest Cost Per Watt
- Multiple Mounting Options
- High-Strength Engineering
The IR BallastRack is one of the most universal solar module ground mounting systems ever developed, and it was specifically designed to rack solar modules of any size, even 800 Watt jumbo size solar panels are no match for the IR-15 Racking System. The IR-15 is a fixed 15° racking system that was built to withstand hurricane force winds (click HERE for Engineering & Datasheets). This make it perfect for southern Texas, Florida, and other regions near the equator or at risk of hurricanes. With 4 innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning-fast install times. Each IR-15 Frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack modules of any size, this system is by far the most cost-effective ground mount racking system on the market today. Unlike some ground mounting systems, the IR-15 doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins... read more
This product conforms to UL 2703 Mechanical and Bonding requirements.
IR-30 BallastRack™ Solar Module Racking System
- Proudly Made in the USA with USA Sourced Aircraft Grade Aluminum
- Fixed 30° Sun Angle
- Capable Of Racking Any Size Module
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
- High-Strength Engineering
The IR-30 is one of the most universal solar module ground mounting systems ever developed, and it was specifically designed to rack solar modules of any size, even 800 Watt jumbo size solar panels are no match for the IR-30 Racking System. The IR-30 is a fixed 30° racking system and is capable of withstanding extremely high wind speeds (Click HERE for Engineering & Datasheets). With 4 innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning fast install times. Each IR-30 Frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack full size modules of any size, this system is by far the most cost effective ground mount racking system on the market today. Unlike some ground mounting systems, the IR-30 doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins...read more
This product conforms to UL 2703 Mechanical and Bonding requirements.
Watch video to see how it works!
IR-45 BallastRack™ Solar Module Racking System
- Proudly Made in the USA with USA Sourced Aircraft Grade Aluminum
- Fixed 45° Sun Angle
- Capable Of Racking Any Size Module
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
- High-Strength Engineering
The IR-45 is one of the most universal solar module ground mounting systems ever developed, and it was specifically designed to rack solar modules of any size, even 800 Watt jumbo size solar panels are no match for the IR-45 Racking System. The IR-45 is a fixed 45° racking system that is great at shedding snow and offers the perfect sun angle for most of the northern United States and Canada (Click HERE for Engineering & Datasheets). With 4 innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning fast install times. Each IR-45 Frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack full size modules of any size, this system is by far the most cost effective ground mount racking system on the market today. Unlike some ground mounting systems, the IR-45 doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins...read more
This product conforms to UL 2703 Mechanical and Bonding requirements.
IR-35A BallastRack™ Fixed Adjustable Angle Solar Module Racking System
- Proudly Made in the USA with USA Sourced Aircraft Grade Aluminum
- 15-35° Fixed Adjustable Solar Angle
- Capable Of Racking Any Size Module
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt With Adjustable Angle (US Made)
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
- High-Strength Engineering
The IR-35A offers all of the same great features of our IR-30 System and is designed to rack solar modules of any size, even 800 Watt jumbo size solar panels are no match for the IR-35A Racking System. The IR-35A can be adjusted in 2.5° increments from 15-35° so you can get as close as possible to the ideal sun angle, with all the same benefits offered by our fixed degree BallastRack systems (Click HERE for Engineering & Datasheets). With 4 innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning-fast install times. Each IR-35A Frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack modules of any size, this system is by far the most cost-effective ground mount racking system on the market today. Unlike some ground mounting systems, the IR-35A doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins...read more
This product conforms to UL 2703 Mechanical and Bonding requirements.
*Not intended for seasonal adjustment.
IR-40FSAB BallastRack™ Fixed Adjustable Angle Solar Module Racking System
- Constructed From Black Zinc Electroplated High-Strength Steel
- 15-40° Fixed Adjustable Solar Angle
- Capable Of Racking Any Size Module
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt With Adjustable Angle
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
The IR-40FSAB is constructed from black zinc plated high-strength steel and offers all of the same great features of our other BallastRack systems with the ability to be set closer to the exact angle needed for maximum performance in your region. This system is designed to rack solar modules of any size, even 800 Watt jumbo size solar panels are no match for the IR-40FSAB. With multiple innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning-fast install times. Each IR-40FSAB frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack modules of any size, this system is by far the most cost-effective adjustable ground mount racking system on the market today. Unlike some ground mounting systems, the IR-40FSAB doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins. The 15-40° adjustable angle can be set to offer optimal year-round energy production across most regions around the world, and with its easy to slide adjustable solar module height feature, it offers great ground clearance and a great angle for fast snow shedding.
This product conforms to UL 2703 Mechanical and Bonding requirements.
*Not intended for seasonal adjustment.
IR-45ASA / IR-45ASAB BallastRack™ Seasonably Adjustable Solar Module Racking System
- Available in Aircraft Grade Aluminum (USA Sourced) or Black Zinc Electroplated High-Strength Steel
- 15-45° Seasonally Adjustable Sun Angle
- Capable Of Racking Very Large Modules
- 2 Minute Assembly Per Frame
- Lowest Cost Per Watt With Seasonal Adjustability
- No Concrete Footings, Post Pounding, or Earth Augers Required
- Multiple Mounting Options
The IR-45ASA / IR-45ASAB offers all of the same great features of our other BallastRack Systems with the ability to be set closer to the exact angle needed for maximum performance in your region. This system is designed to rack solar modules of any size, even large 550 Watt solar panels are no match for the IR-45ASA. With 4 innovative mounting options available to choose from, even soft sand or super rocky terrain is no problem at all for lightning-fast install times (Click HERE for Engineering & Datasheets). Each IR-45ASA frame can be assembled in less than 2 minutes, and with its unbelievable ability to rack modules of any size, this system is by far the most cost-effective ground mount racking system on the market today. Unlike some ground mounting systems, the IR-45ASA doesn't require any concrete footings, post pounded poles, or hand shoveling dirt into small bins...read more
This product conforms to UL 2703 Mechanical and Bonding requirements.
IR-T1 TileBallast™ No Penetration Tile Roof Mounting System
- Aeronautical Wind Tunnel Tested at 165 MPH with 3:1 Safety Factor
- No Penetration
- No Tile Removal
- 4x Faster Install Times
- For Use With All Rail Systems
- Flex Point Prevents Bolt Tension From Cracking Tiles
The IR-T1 is the first of its kind and the only tile roof hook that requires no removal of tiles and no roof penetration at all. This mount is much stronger than traditional tile roof hooks and our proprietary installation system actually increases the overall strength of the entire roof structure. When installed using our own IntegraGel Industrial Strength Two Part Epoxy, each mount is capable of withstanding over 175lbs of direct uplift and transforms standard roof tiles into larger foot ballast system for the solar module rails to attach directly to.
This product conforms to UL 2703 Mechanical and Bonding requirements.
Watch video to see how it works!
IR-05 BallastBase™ Flat Roof Mounting System
- 30 Second Assembly Per Bracket
- 5 Minute Install Per Module
- Capable of Racking Solar Modules Up To 700 Watts
- Multiple Roof Mounting Methods
- Integrated Module Bonding & Micro-Inverter Mounting
The IR-05 BallastBase™ Flat Roof Mounting System is one of the fastest, strongest, and most cost effective system on the market. Our IR-05 Bracket is designed to clamp around a standard cinder block and the integrated handle allows one person to carry and place multiple base systems with weight without the fatigue caused by other ballasted basket type systems. If ballasted weight cannot be supported by the roof, the IR-05 can also be mounted with our test proven IntegraGel Industrial Strength Two Part Epoxy or directly bolted to the roof surface.
This product conforms to UL 2703 Mechanical and Bonding requirements.
Watch video to see how it works!
IntegraRack® Utility Scale Solar Racking
IntegraRack provides advanced ground-mounted systems designed for large-scale commercial projects, with costs as low as $0.10 per watt and installation times up to six times faster than traditional ground mount systems. Our BallastRack product line features a variety of models with both fixed and adjustable angles, aircraft-grade aluminum and durable composite frames available. Each BallastRack model is equipped with versatile mounting options, allowing for straightforward installation in a wide range of locations without the need for concrete footings, post pounding, or earth augers.
Tested for Strength and Quality
25 Year Warranty
IntegraRack offers a 25 year limited warranty for our full line of racking products. This warranty provides full parts replacement for any manufacturer defects.
IntegraRack Systems Utilize UL 2703 Recognized Bonding Components
All of our systems, when installed as instructed, meet UL 2703 requirements for electrical bonding. IntegraRack racking systems are rigorously tested by Phoenix National Laboratories to meet or exceed the mechanical requirements for most all building codes for high wind and snow loads.
High End Manufacturing Capability
IntegraRack utilizes only the latest cutting edge technology in our precision manufacturing process, and quality control is our highest priority. All IntegraRack products are 100% corrosion resistant.
IntegraRack® Manufacturing
Las Vegas, NV
Product Testing
All IntegraRack products are designed to exceed all mechanical strength requirements and are tested for use in all 50 states by Phoenix National Laboratories.
About IntegraRack
IntegraRack® has over 30 years of product development and manufacturing, with products such as ATS Building Systems in the late 80’s, Diversi-Tech® Hitches and Security Products (Fastway® Towing Products) IntegraRack® Solar Systems and Integra Truck Bodies and Trailers™.